Arduino MKR WiFi 1010 vs SparkFun Electronics Thing Plus - ESP32 WROOM (USB-C)
Both are controllers. Where they differ, as each maker states it: clock speed: 48 MHz and 240 MHz. Every number links to the maker's own page.
| Spec | Arduino MKR WiFi 1010 | SparkFun Electronics Thing Plus - ESP32 WROOM (USB-C) |
|---|---|---|
| Processor | SAMD21G18A docs.arduino.cc | Dual-core Xtensa 32-bit LX6 sparkfun.com |
| Clock speed | 48 MHz docs.arduino.cc | 240 MHz sparkfun.com |
| SRAM | 32 kB docs.arduino.cc | 520 KB sparkfun.com |
| Bluetooth | 5.0 (dual mode) docs.arduino.cc | Classic Bluetooth and BLE sparkfun.com |
| Flash memory | 256 kB docs.arduino.cc | not stated |
| Maximum input voltage from VIN pad | 5.5 V docs.arduino.cc | not stated |
| Wi-Fi | 72 Mbit/s docs.arduino.cc | not stated |
| Flash | not stated | 16 MB sparkfun.com |
| Wi-Fi | not stated | 802.11b/g/n sparkfun.com |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison
Also compared
- Arduino Nano 33 BLE vs Arduino MKR WiFi 1010
- ROBOTIS CM-900 vs Arduino MKR WiFi 1010
- Arduino Nano 33 BLE Sense Rev2 vs SparkFun Electronics Thing Plus - ESP32 WROOM (USB-C)
- Arduino Arduino Nano ESP32 vs SparkFun Electronics Thing Plus - ESP32 WROOM (USB-C)
- Arduino Nano RP2040 Connect vs SparkFun Electronics Thing Plus - ESP32 WROOM (USB-C)
- DFRobot FireBeetle 2 ESP32-E IoT Microcontroller vs SparkFun Electronics Thing Plus - ESP32 WROOM (USB-C)
- Petoi BiBoard V1 vs SparkFun Electronics Thing Plus - ESP32 WROOM (USB-C)
- SparkFun Electronics Pro Micro - ESP32-C3 vs SparkFun Electronics Thing Plus - ESP32 WROOM (USB-C)
- SparkFun Electronics Pro Micro - RP2040 vs SparkFun Electronics Thing Plus - ESP32 WROOM (USB-C)
- SparkFun Electronics Thing Plus - ESP32-C6 vs SparkFun Electronics Thing Plus - ESP32 WROOM (USB-C)