Arduino Arduino Nano R4 vs DFRobot Beetle RP2350
Both are controllers. Where they differ, as each maker states it: clock speed: 48 MHz and 150 MHz; input voltage: 5 V and 3.3 V. Every number links to the maker's own page.
| Spec | Arduino Arduino Nano R4 | DFRobot Beetle RP2350 |
|---|---|---|
| Microcontroller | Renesas RA4M1 docs.arduino.cc | Dual-core Cortex-M33 or Hazard3 RISC-V wiki.dfrobot.com |
| Clock speed | 48 MHz docs.arduino.cc | 150 MHz wiki.dfrobot.com |
| Input voltage | 5 V docs.arduino.cc | 3.3 V wiki.dfrobot.com |
| USB | USB-C docs.arduino.cc | USB 1.1 wiki.dfrobot.com |
| Flash memory | 256 kB docs.arduino.cc | not stated |
| SRAM | 32 kB docs.arduino.cc | not stated |
| RAM | not stated | 520 KB wiki.dfrobot.com |
| Flash | not stated | 2 MB wiki.dfrobot.com |
| IO pins | not stated | 11 wiki.dfrobot.com |
| Dimensions | not stated | 25 mm x 20.5 mm wiki.dfrobot.com |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison
Also compared
- Arduino Arduino Nano 33 IoT vs Arduino Arduino Nano R4
- Arduino Arduino UNO R4 Minima vs Arduino Arduino Nano R4
- Arduino Arduino UNO R4 WiFi vs Arduino Arduino Nano R4
- Pololu A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge vs Arduino Arduino Nano R4
- Arduino Arduino Nano ESP32 vs DFRobot Beetle RP2350
- Arduino Arduino UNO R4 Minima vs DFRobot Beetle RP2350