Hiwonder HTD-45H vs ROBOTIS DYNAMIXEL XC430-W240-T
Both are servos. Where they differ, as each maker states it: weight: 64 g and 65 g. Every number links to the maker's own page.
| Spec | Hiwonder HTD-45H | ROBOTIS DYNAMIXEL XC430-W240-T |
|---|---|---|
| Input voltage | 9-12.6 V hiwonder.com | 6.5 to 14.8 V (12.0 V recommended) emanual.robotis.com |
| Interface | UART serial bus, PH2.0-3P connector hiwonder.com | TTL level multidrop bus emanual.robotis.com |
| Weight | 64 g hiwonder.com | 65 g emanual.robotis.com |
| Dimensions | 51.1 x 20.14 x 40 mm hiwonder.com | 28.5 x 46.5 x 34 mm emanual.robotis.com |
| Stall torque | 45 kg·cm hiwonder.com | not stated |
| Rotation speed | 0.18 s/60° hiwonder.com | not stated |
| Rotation range | 0-240 ° hiwonder.com | not stated |
| Stall torque | not stated | 1.9 N·m emanual.robotis.com |
| No-load speed | not stated | 70 rpm emanual.robotis.com |
| Resolution | not stated | 4 096 pulse/rev emanual.robotis.com |
| Gear ratio | not stated | 245.22:1 emanual.robotis.com |
| Motor | not stated | Coreless emanual.robotis.com |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison
Also compared
- DFRobot DF15RMG Tilt Kit (20kg) vs Hiwonder HTD-45H
- Hitec RCD D845WP vs Hiwonder HTD-45H
- Hiwonder HPS-4518SG vs Hiwonder HTD-45H
- Hiwonder HX-20L vs Hiwonder HTD-45H
- Hiwonder LD-20MG vs Hiwonder HTD-45H
- Hiwonder LX-224 Serial Bus Servo vs Hiwonder HTD-45H
- ROBOTIS DYNAMIXEL XC430-T150BB-T vs Hiwonder HTD-45H
- ROBOTIS DYNAMIXEL RX-10 vs ROBOTIS DYNAMIXEL XC430-W240-T
- ROBOTIS DYNAMIXEL XC430-T240BB-T vs ROBOTIS DYNAMIXEL XC430-W240-T
- ROBOTIS DYNAMIXEL XC430-W150-T vs ROBOTIS DYNAMIXEL XC430-W240-T
- ROBOTIS DYNAMIXEL XH540-W150-T vs ROBOTIS DYNAMIXEL XC430-W240-T