maxon EPOS4 Micro 24/1.5 EtherCAT vs Pololu Dual TB9051FTG Motor Driver for Raspberry Pi
Both are controllers. Where they differ, as each maker states it: continuous output current: 1.5 A and 2.6 A; peak output current: 4.5 A and 5 A; weight: 7 g and 28 g. Every number links to the maker's own page.
| Spec | maxon EPOS4 Micro 24/1.5 EtherCAT | Pololu Dual TB9051FTG Motor Driver for Raspberry Pi |
|---|---|---|
| Continuous output current | 1.5 A maxongroup.com | 2.6 A pololu.com |
| Peak output current | 4.5 A maxongroup.com | 5 A pololu.com |
| Size | 36.5 x 27.0 x 7.0 maxongroup.com | 65 mm x 56 mm pololu.com |
| Weight | 7 g maxongroup.com | 28 g pololu.com |
| Supply voltage | 10 to 24 VDC maxongroup.com | not stated |
| Interface | EtherCAT maxongroup.com | not stated |
| Operating temperature | -30 to +54 °C maxongroup.com | not stated |
| Motor channels | not stated | 2 pololu.com |
| Minimum operating voltage | not stated | 4.5 V pololu.com |
| Maximum operating voltage | not stated | 28 V pololu.com |
| Maximum PWM frequency | not stated | 20 kHz pololu.com |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison
Also compared
- maxon EPOS4 Compact 50/8 EtherCAT (605298) vs maxon EPOS4 Micro 24/1.5 EtherCAT
- maxon EPOS4 Micro 24/1.5 CAN (951711) vs maxon EPOS4 Micro 24/1.5 EtherCAT
- Pololu Dual MC33926 Motor Driver for Raspberry Pi vs maxon EPOS4 Micro 24/1.5 EtherCAT
- Pololu Dual MC33926 Motor Driver for Raspberry Pi vs Pololu Dual TB9051FTG Motor Driver for Raspberry Pi
- Pololu Dual TB9051FTG Motor Driver Shield for Arduino vs Pololu Dual TB9051FTG Motor Driver for Raspberry Pi
- Pololu Jrk G2 21v3 vs Pololu Dual TB9051FTG Motor Driver for Raspberry Pi
- Pololu Motoron M2T550 Dual I2C Motor Controller vs Pololu Dual TB9051FTG Motor Driver for Raspberry Pi