Movella Xsens MTi-630 AHRS vs VectorNav VN-210E
Both are IMUs. Where they differ, as each maker states it: accelerometer range: 10 g and 15 g; weight: 8.9 g and 14 g. Every number links to the maker's own page.
| Spec | Movella Xsens MTi-630 AHRS | VectorNav VN-210E |
|---|---|---|
| Accelerometer range | 10 g xsens.com | 15 g vectornav.com |
| Interface | UART, CAN, RS232 xsens.com | 24-pin CLR, 2x serial TTL vectornav.com |
| Dimensions | 28 x 31.5 x 13 xsens.com | 31 x 31 x 12 mm vectornav.com |
| Weight | 8.9 g xsens.com | 14 g vectornav.com |
| Roll/pitch accuracy | 0.2 deg RMS xsens.com | not stated |
| Heading accuracy | 1 deg RMS xsens.com | not stated |
| Gyroscope range | 2 000 deg/s xsens.com | not stated |
| Maximum output rate | 2 000 Hz xsens.com | not stated |
| Supply voltage | 4.5 to 24 xsens.com | not stated |
| Heading accuracy | not stated | 0.05 to 0.1 deg 1σ vectornav.com |
| Gyroscope range | not stated | 490 deg/s vectornav.com |
| GNSS receiver | not stated | 184-channel L1/L2/E5b vectornav.com |
| Gyro bias stability | not stated | < 1 deg/hr vectornav.com |
| Operating temperature | not stated | -40 to +85 C vectornav.com |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison
Also compared
- Bosch Sensortec BMI088 vs Movella Xsens MTi-630 AHRS
- DFRobot Fermion: MPU-6050 6 DOF Sensor vs Movella Xsens MTi-630 AHRS
- VectorNav VN-100 Rugged IMU/AHRS vs Movella Xsens MTi-630 AHRS
- VectorNav VN-100 SMD vs Movella Xsens MTi-630 AHRS
- VectorNav VN-110E vs Movella Xsens MTi-630 AHRS
- VectorNav VN-200 Rugged GNSS/INS vs Movella Xsens MTi-630 AHRS
- MicroStrain 3DM-GV7-AHRS vs VectorNav VN-210E
- VectorNav VN-110 vs VectorNav VN-210E
- VectorNav VN-110E vs VectorNav VN-210E
- VectorNav VN-310E vs VectorNav VN-210E