Orbbec MS200K vs SLAMTEC RPLIDAR A3
Both are lidars. Where they differ, as each maker states it: weight: 45 g and 190 g. Every number links to the maker's own page.
| Spec | Orbbec MS200K | SLAMTEC RPLIDAR A3 |
|---|---|---|
| Working range | 0.03 to 12 m orbbec.com | 25 m slamtec.com |
| Scan frequency | 7 to 15 Hz orbbec.com | 10 Hz slamtec.com |
| Angular range | 360 deg orbbec.com | 360 deg slamtec.com |
| Sample rate | 4 500 Hz/s orbbec.com | 16 000 samples/s slamtec.com |
| Weight | 45 g orbbec.com | 190 g slamtec.com |
| Input voltage | 5.0±0.3 V orbbec.com | not stated |
| Power | 2.5 W orbbec.com | not stated |
| Dimensions | 54.3 x 47 x 35 mm orbbec.com | not stated |
| Angular resolution | not stated | 0.225 deg slamtec.com |
| Interface | not stated | UART serial, 3.3 V level slamtec.com |
| Operating temperature | not stated | 0 to 40 C slamtec.com |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison