Orbbec Pulsar ME450 vs Ouster OS1 (Rev8)
Both are lidars. Where they differ, as each maker states it: weight: 270 g and 500 g. Every number links to the maker's own page.
| Spec | Orbbec Pulsar ME450 | Ouster OS1 (Rev8) |
|---|---|---|
| Interface | 8-pin aviation connector, 100 Mbps network new-orbbec3d-s3.s3.amazonaws.com | UDP over gigabit Ethernet data.ouster.io |
| Weight | 270 g new-orbbec3d-s3.s3.amazonaws.com | 500 g data.ouster.io |
| Power | 6 W new-orbbec3d-s3.s3.amazonaws.com | 10 to 20 W data.ouster.io |
| IP rating | IP67 new-orbbec3d-s3.s3.amazonaws.com | IP68 and IP69K ouster.com |
| Working range | 45 m new-orbbec3d-s3.s3.amazonaws.com | not stated |
| Horizontal field of view | 270 deg new-orbbec3d-s3.s3.amazonaws.com | not stated |
| Sample rate | 200 kHz new-orbbec3d-s3.s3.amazonaws.com | not stated |
| Detection range | not stated | 90 m data.ouster.io |
| Range | not stated | 170 m data.ouster.io |
| Channels | not stated | 32, 64 or 128 data.ouster.io |
| Range precision | not stated | ±0.25 to ±1.5 cm data.ouster.io |
| Scan frequency | not stated | 5 to 40 Hz (configurable) data.ouster.io |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison