Pololu 150:1 Micro Metal Gearmotor HP 6V vs Pololu 20.4:1 Metal Gearmotor 25Dx65L mm LP 12V with 48 CPR Encoder
Both are motor and drives. Where they differ, as each maker states it: no-load speed: 210 rpm and 280 rpm; shaft diameter: 3 mm and 4 mm. Every number links to the maker's own page.
| Spec | Pololu 150:1 Micro Metal Gearmotor HP 6V | Pololu 20.4:1 Metal Gearmotor 25Dx65L mm LP 12V with 48 CPR Encoder |
|---|---|---|
| Gear ratio | 150.58 :1 pololu.com | 20.4 :1 pololu.com |
| No-load speed | 210 rpm pololu.com | 280 rpm pololu.com |
| Stall torque at 6 V | 2.4 kg·cm pololu.com | 2.4 kg·cm pololu.com |
| Shaft diameter | 3 mm pololu.com | 4 mm pololu.com |
| Input voltage | 6 V pololu.com | not stated |
| Stall current | 1.6 A pololu.com | not stated |
| Weight | 9.5 g pololu.com | not stated |
| Size | 10 × 12 × 25 mm pololu.com | not stated |
| Motor type | not stated | low-power, 12 V brushed DC pololu.com |
| Encoder resolution | not stated | 48 CPR pololu.com |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison
Also compared
- Pololu 100:1 Micro Metal Gearmotor HP 6V vs Pololu 150:1 Micro Metal Gearmotor HP 6V
- Pololu 150:1 Micro Metal Gearmotor HPCB 12V vs Pololu 150:1 Micro Metal Gearmotor HP 6V
- Pololu 250:1 Micro Metal Gearmotor HP 6V vs Pololu 150:1 Micro Metal Gearmotor HP 6V
- Pololu 20.4:1 Metal Gearmotor 25Dx65L mm MP 12V with 48 CPR Encoder vs Pololu 20.4:1 Metal Gearmotor 25Dx65L mm LP 12V with 48 CPR Encoder
- Pololu 34:1 Metal Gearmotor 25Dx67L mm HP 12V with 48 CPR Encoder vs Pololu 20.4:1 Metal Gearmotor 25Dx65L mm LP 12V with 48 CPR Encoder