Pololu 250:1 Micro Metal Gearmotor HP 6V vs Pololu 47:1 Metal Gearmotor 25Dx67L mm LP 12V with 48 CPR Encoder
Both are motor and drives. Where they differ, as each maker states it: stall torque at 6 V: 3.4 kg·cm and 4.8 kg·cm; shaft diameter: 3 mm and 4 mm. Every number links to the maker's own page.
| Spec | Pololu 250:1 Micro Metal Gearmotor HP 6V | Pololu 47:1 Metal Gearmotor 25Dx67L mm LP 12V with 48 CPR Encoder |
|---|---|---|
| Gear ratio | 248.98 :1 pololu.com | 46.85 :1 pololu.com |
| No-load speed | 120 rpm pololu.com | 120 rpm pololu.com |
| Stall torque at 6 V | 3.4 kg·cm pololu.com | 4.8 kg·cm pololu.com |
| Shaft diameter | 3 mm pololu.com | 4 mm pololu.com |
| Input voltage | 6 V pololu.com | not stated |
| Stall current | 1.6 A pololu.com | not stated |
| Weight | 9.5 g pololu.com | not stated |
| Size | 10 × 12 × 25 mm pololu.com | not stated |
| Motor type | not stated | low-power, 12 V brushed DC pololu.com |
| Encoder resolution | not stated | 48 CPR pololu.com |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison
Also compared
- Pololu 150:1 Micro Metal Gearmotor HP 6V vs Pololu 250:1 Micro Metal Gearmotor HP 6V
- Pololu 250:1 Metal Gearmotor 20Dx46L mm 12V CB vs Pololu 250:1 Micro Metal Gearmotor HP 6V
- Pololu 298:1 Micro Metal Gearmotor HP 6V vs Pololu 250:1 Micro Metal Gearmotor HP 6V
- Pololu 380:1 Micro Metal Gearmotor HP 6V vs Pololu 250:1 Micro Metal Gearmotor HP 6V
- Pololu 34:1 Metal Gearmotor 25Dx67L mm LP 12V with 48 CPR Encoder vs Pololu 47:1 Metal Gearmotor 25Dx67L mm LP 12V with 48 CPR Encoder
- Pololu 47:1 Metal Gearmotor 25Dx67L mm MP 12V with 48 CPR Encoder vs Pololu 47:1 Metal Gearmotor 25Dx67L mm LP 12V with 48 CPR Encoder
- Pololu 75:1 Metal Gearmotor 25Dx69L mm LP 12V with 48 CPR Encoder vs Pololu 47:1 Metal Gearmotor 25Dx67L mm LP 12V with 48 CPR Encoder