Robocho Join free

Compare

Pololu 30:1 Metal Gearmotor 37Dx68L mm 12V with 64 CPR Encoder (Helical Pinion) vs Pololu 47:1 Metal Gearmotor 25Dx67L mm HP 12V with 48 CPR Encoder

Both are motor and drives. Where they differ, as each maker states it: no-load speed: 330 rpm and 220 rpm; stall torque at 6 V: 14 kg·cm and 15 kg·cm; stall current: 5.5 A and 5 A. Every number links to the maker's own page.

Spec Pololu 30:1 Metal Gearmotor 37Dx68L mm 12V with 64 CPR Encoder (Helical Pinion)Pololu 47:1 Metal Gearmotor 25Dx67L mm HP 12V with 48 CPR Encoder
Gear ratio30:1
pololu.com
46.85 :1
pololu.com
No-load speed330 rpm
pololu.com
220 rpm
pololu.com
Stall torque at 6 V14 kg·cm
pololu.com
15 kg·cm
pololu.com
Stall current5.5 A
pololu.com
5 A
pololu.com
Encoder resolution64 CPR
pololu.com
not stated
Input voltagenot stated12 V
pololu.com
Weightnot stated101 g
pololu.com
Shaft diameternot stated4 mm
pololu.com
Encodernot stated48 CPR
pololu.com
Sizenot stated25D x 67L mm
pololu.com

Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.

Add more models to this comparison

Also compared