Robocho Join free

Compare

Pololu 30:1 Metal Gearmotor 37Dx68L mm 12V with 64 CPR Encoder (Spur Pinion) vs REV Robotics NEO Brushless Motor V1.1

Both are motor and drives. Where they differ, as each maker states it: stall current: 5.5 A and 105 A; weight: 200 g and 425 g. Every number links to the maker's own page.

Spec Pololu 30:1 Metal Gearmotor 37Dx68L mm 12V with 64 CPR Encoder (Spur Pinion)REV Robotics NEO Brushless Motor V1.1
Stall current5.5 A
pololu.com
105 A
revrobotics.com
Input voltage12 V
pololu.com
12 V
revrobotics.com
Weight200 g
pololu.com
425 g
revrobotics.com
Encoder resolution64 CPR
pololu.com
42 counts/rev
revrobotics.com
Gear ratio30:1
pololu.com
not stated
No-load speed330 rpm
pololu.com
not stated
Stall torque at 6 V14 kg·cm
pololu.com
not stated
No-load current at 6 V0.2 A
pololu.com
not stated
Free speednot stated5 676 RPM
revrobotics.com
Stall torquenot stated2.6 Nm
revrobotics.com
Body diameternot stated60 mm
revrobotics.com

Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.

Add more models to this comparison

Also compared