Robocho Join free

Compare

Pololu 50:1 Micro Metal Gearmotor HP 6V vs Pololu 9.7:1 Metal Gearmotor 25Dx63L mm MP 12V with 48 CPR Encoder

Both are motor and drives. Where they differ, as each maker states it: no-load speed: 590 rpm and 800 rpm; stall current: 1.6 A and 1.8 A; shaft diameter: 3 mm and 4 mm. Every number links to the maker's own page.

Spec Pololu 50:1 Micro Metal Gearmotor HP 6VPololu 9.7:1 Metal Gearmotor 25Dx63L mm MP 12V with 48 CPR Encoder
Gear ratio51.45 :1
pololu.com
9.68 :1
pololu.com
No-load speed590 rpm
pololu.com
800 rpm
pololu.com
Stall current1.6 A
pololu.com
1.8 A
pololu.com
Shaft diameter3 mm
pololu.com
4 mm
pololu.com
Input voltage6 V
pololu.com
not stated
Stall torque at 6 V0.86 kg·cm
pololu.com
not stated
Weight9.5 g
pololu.com
not stated
Size10 × 12 × 25 mm
pololu.com
not stated
Encodernot stated48 CPR
pololu.com

Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.

Add more models to this comparison

Also compared