Pololu Motoron M3H256 Triple Motor Controller vs Pololu Motoron M3T453 Triple I2C Motor Controller with JST SH-Style Connectors and VIN Terminal Block
Both are controllers. Where they differ, as each maker states it: maximum operating voltage: 48 V and 44 V; continuous output current: 2 A and 0.8 A. Every number links to the maker's own page.
| Spec | Pololu Motoron M3H256 Triple Motor Controller | Pololu Motoron M3T453 Triple I2C Motor Controller with JST SH-Style Connectors and VIN Terminal Block |
|---|---|---|
| Motor channels | 3 pololu.com | 3 pololu.com |
| Minimum operating voltage | 4.5 V pololu.com | 4.5 V pololu.com |
| Maximum operating voltage | 48 V pololu.com | 44 V pololu.com |
| Continuous output current | 2 A pololu.com | 0.8 A pololu.com |
| Peak output current | 6.4 A pololu.com | not stated |
| Control interface | I2C pololu.com | not stated |
| Host board | Raspberry Pi (Model B+ or newer) pololu.com | not stated |
| Interface | not stated | I2C pololu.com |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison
Also compared
- Pololu DRV8256P Single Brushed DC Motor Driver Carrier vs Pololu Motoron M3H256 Triple Motor Controller
- Pololu DRV8263H Single Brushed DC Motor Driver Carrier vs Pololu Motoron M3H256 Triple Motor Controller
- Pololu Motoron M2T256 Dual I2C Motor Controller vs Pololu Motoron M3H256 Triple Motor Controller
- Pololu A4990 Dual Motor Driver Carrier vs Pololu Motoron M3T453 Triple I2C Motor Controller with JST SH-Style Connectors and VIN Terminal Block
- Pololu AMIS-30543 Stepper Motor Driver Carrier vs Pololu Motoron M3T453 Triple I2C Motor Controller with JST SH-Style Connectors and VIN Terminal Block
- Pololu DRV8876 Single Brushed DC Motor Driver Carrier vs Pololu Motoron M3T453 Triple I2C Motor Controller with JST SH-Style Connectors and VIN Terminal Block