Pololu Stepper Motor: Bipolar, 200 Steps/Rev, 20×42mm, 4.3V, 0.8 A/Phase vs Pololu Stepper Motor: Bipolar, 200 Steps/Rev, 28×32mm, 3.8V, 0.67 A/Phase
Both are motor and drives. Where they differ, as each maker states it: input voltage: 4.3 V and 3.8 V; current per phase: 800 mA and 670 mA; holding torque: 300 g-cm and 600 g-cm. Every number links to the maker's own page.
| Spec | Pololu Stepper Motor: Bipolar, 200 Steps/Rev, 20×42mm, 4.3V, 0.8 A/Phase | Pololu Stepper Motor: Bipolar, 200 Steps/Rev, 28×32mm, 3.8V, 0.67 A/Phase |
|---|---|---|
| Steps per revolution | 200 pololu.com | 200 pololu.com |
| Input voltage | 4.3 V pololu.com | 3.8 V pololu.com |
| Current per phase | 800 mA pololu.com | 670 mA pololu.com |
| Holding torque | 300 g-cm pololu.com | 600 g-cm pololu.com |
| Weight | 80 g pololu.com | 110 g pololu.com |
| Frame size | not stated | 28 x 32 mm pololu.com |
| Resistance per coil | not stated | 5.6 Ω pololu.com |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison
Also compared
- Pololu Stepper Motor: Bipolar, 200 Steps/Rev, 20×30mm, 3.9V, 0.6 A/Phase vs Pololu Stepper Motor: Bipolar, 200 Steps/Rev, 20×42mm, 4.3V, 0.8 A/Phase
- Pololu Stepper Motor: Bipolar, 200 Steps/Rev, 28×45mm, 4.5V, 0.67 A/Phase vs Pololu Stepper Motor: Bipolar, 200 Steps/Rev, 20×42mm, 4.3V, 0.8 A/Phase
- Pololu Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 42×11.6mm, 3.5V, 1 A/Phase vs Pololu Stepper Motor: Bipolar, 200 Steps/Rev, 28×32mm, 3.8V, 0.67 A/Phase
- Pololu Stepper Motor: Bipolar, 200 Steps/Rev, 28×45mm, 4.5V, 0.67 A/Phase vs Pololu Stepper Motor: Bipolar, 200 Steps/Rev, 28×32mm, 3.8V, 0.67 A/Phase
- Pololu Stepper Motor: Bipolar, 200 Steps/Rev, 35×28mm, 10V, 0.5 A/Phase vs Pololu Stepper Motor: Bipolar, 200 Steps/Rev, 28×32mm, 3.8V, 0.67 A/Phase