ROBOTIS DYNAMIXEL AX-12A vs ROBOTIS DYNAMIXEL XL430-W250-T
Both are servos. Where they differ, as each maker states it: stall torque: 1.5 N·m and 1.4 N·m; weight: 54.6 g and 57.2 g. Every number links to the maker's own page.
| Spec | ROBOTIS DYNAMIXEL AX-12A | ROBOTIS DYNAMIXEL XL430-W250-T |
|---|---|---|
| Stall torque | 1.5 N·m emanual.robotis.com | 1.4 N·m emanual.robotis.com |
| Input voltage | 9.0 to 12.0 V (11.1 V recommended) emanual.robotis.com | 6.5 to 12.0 V (11.1 V recommended) emanual.robotis.com |
| Resolution | 0.29 deg emanual.robotis.com | 4 096 pulse/rev emanual.robotis.com |
| Interface | TTL multidrop bus, half duplex serial emanual.robotis.com | TTL multidrop bus (5 V logic) emanual.robotis.com |
| Weight | 54.6 g emanual.robotis.com | 57.2 g emanual.robotis.com |
| Gear ratio | 254:1 emanual.robotis.com | 258.5:1 emanual.robotis.com |
| Operating angle | 0 to 300 deg, or endless turn emanual.robotis.com | not stated |
| No-load speed | not stated | 57 rpm emanual.robotis.com |
| Dimensions | not stated | 28.5 x 46.5 x 34 mm emanual.robotis.com |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison
Also compared
- ROBOTIS DYNAMIXEL DX-113 vs ROBOTIS DYNAMIXEL AX-12A
- ROBOTIS DYNAMIXEL MX-12W vs ROBOTIS DYNAMIXEL AX-12A
- Hiwonder HPS-2527SG vs ROBOTIS DYNAMIXEL XL430-W250-T
- Hiwonder HPS-3518SG vs ROBOTIS DYNAMIXEL XL430-W250-T
- Hiwonder HPS-4527SG vs ROBOTIS DYNAMIXEL XL430-W250-T
- Hiwonder LX-824HV vs ROBOTIS DYNAMIXEL XL430-W250-T
- Lynxmotion LSS-HS1 vs ROBOTIS DYNAMIXEL XL430-W250-T
- Lynxmotion LSS-ST1 vs ROBOTIS DYNAMIXEL XL430-W250-T
- ROBOTIS DYNAMIXEL DX-113 vs ROBOTIS DYNAMIXEL XL430-W250-T