ROBOTIS DYNAMIXEL XD540-T150-R vs ROBOTIS DYNAMIXEL XH540-W150-T
Both are servos. Their stated specs are close. Every number links to the maker's own page.
| Spec | ROBOTIS DYNAMIXEL XD540-T150-R | ROBOTIS DYNAMIXEL XH540-W150-T |
|---|---|---|
| Stall torque | 7.1 N·m emanual.robotis.com | 7.1 Nm robotis.us |
| No-load speed | 70 rpm emanual.robotis.com | 70 rpm robotis.us |
| Input voltage | 10.0 to 14.8 V (12.0 V recommended) emanual.robotis.com | 12 V robotis.us |
| Resolution | 4 096 pulse/rev emanual.robotis.com | 4 096 steps robotis.us |
| Interface | RS-485 multidrop bus emanual.robotis.com | TTL robotis.us |
| Dimensions | 33.5 x 58.5 x 44 mm emanual.robotis.com | 33.5 x 58.5 x 45 mm robotis.us |
| Gear ratio | 152.3:1 emanual.robotis.com | not stated |
| Motor | Coreless emanual.robotis.com | not stated |
| Weight | 170 g emanual.robotis.com | not stated |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison
Also compared
- ROBOTIS DYNAMIXEL XC430-T240BB-T vs ROBOTIS DYNAMIXEL XD540-T150-R
- ROBOTIS DYNAMIXEL XH540-W150-R vs ROBOTIS DYNAMIXEL XD540-T150-R
- ROBOTIS DYNAMIXEL XW540-T140-R vs ROBOTIS DYNAMIXEL XD540-T150-R
- Lynxmotion LSS-HS1 vs ROBOTIS DYNAMIXEL XH540-W150-T
- Lynxmotion LSS-HT1 vs ROBOTIS DYNAMIXEL XH540-W150-T
- Lynxmotion LSS-ST1 vs ROBOTIS DYNAMIXEL XH540-W150-T
- ROBOTIS DYNAMIXEL 2XC430-W250-T vs ROBOTIS DYNAMIXEL XH540-W150-T
- ROBOTIS DYNAMIXEL MX-64T vs ROBOTIS DYNAMIXEL XH540-W150-T
- ROBOTIS DYNAMIXEL XC330-T288-T vs ROBOTIS DYNAMIXEL XH540-W150-T
- ROBOTIS DYNAMIXEL XC430-W240-T vs ROBOTIS DYNAMIXEL XH540-W150-T
- ROBOTIS DYNAMIXEL XM430-W210-T vs ROBOTIS DYNAMIXEL XH540-W150-T