Robocho Join free

Compare

ROBOTIS DYNAMIXEL XH540-W270-T vs ROBOTIS DYNAMIXEL XW540-T260-R

Both are servos. Where they differ, as each maker states it: stall torque: 9.9 N·m and 9.5 N·m; no-load speed: 39 rpm and 40 rpm. Every number links to the maker's own page.

Spec ROBOTIS DYNAMIXEL XH540-W270-TROBOTIS DYNAMIXEL XW540-T260-R
Stall torque9.9 N·m
emanual.robotis.com
9.5 N·m
emanual.robotis.com
No-load speed39 rpm
emanual.robotis.com
40 rpm
emanual.robotis.com
Input voltage10.0 to 14.8 V (12.0 V recommended)
emanual.robotis.com
10.0 to 14.8 V (12.0 V recommended)
emanual.robotis.com
Resolution4 096 pulse/rev
emanual.robotis.com
4 096 pulse/rev
emanual.robotis.com
Gear ratio272.5:1
emanual.robotis.com
260.6:1
emanual.robotis.com
InterfaceTTL multidrop bus (-T version)
emanual.robotis.com
RS-485 multidrop bus
emanual.robotis.com
Weight165 g
emanual.robotis.com
185 g
emanual.robotis.com
Dimensions33.5 x 58.5 x 44 mm
emanual.robotis.com
33.5 x 58.5 x 45.9 mm
emanual.robotis.com
MotorCoreless (Maxon)
emanual.robotis.com
not stated
Operating temperaturenot stated-5 to +80 °C
emanual.robotis.com

Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.

Add more models to this comparison

Also compared