SBG Systems Ellipse-N vs VectorNav VN-100 Rugged IMU/AHRS
Both are IMUs. Where they differ, as each maker states it: weight: 47 g and 15 g. Every number links to the maker's own page.
| Spec | SBG Systems Ellipse-N | VectorNav VN-100 Rugged IMU/AHRS |
|---|---|---|
| Maximum output rate | 200 Hz sbg-systems.com | up to 800 Hz vectornav.com |
| Interface | RS-232/422, CAN sbg-systems.com | Serial TTL, RS-232 vectornav.com |
| Dimensions | 46 x 45 x 24 sbg-systems.com | 36 x 33 x 9 mm vectornav.com |
| Weight | 47 g sbg-systems.com | 15 g vectornav.com |
| Heading accuracy | 0.2 deg sbg-systems.com | not stated |
| Roll/pitch accuracy | 0.1 deg sbg-systems.com | not stated |
| Supply voltage | 5 to 36 VDC sbg-systems.com | not stated |
| Operating temperature | -40 to 85 °C sbg-systems.com | not stated |
| Heading accuracy | not stated | 2.0° RMS vectornav.com |
| Pitch/roll accuracy | not stated | 0.5° RMS vectornav.com |
| Gyro in-run bias stability | not stated | < 10°/hr (5°/hr typical) vectornav.com |
| Accelerometer range | not stated | ±16 g vectornav.com |
| Gyro range | not stated | ±2,000°/s vectornav.com |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison
Also compared
- MicroStrain 3DM-GV7-AHRS vs SBG Systems Ellipse-N
- VectorNav VN-200 Rugged GNSS/INS vs SBG Systems Ellipse-N
- VectorNav VN-200 SMD GNSS/INS vs SBG Systems Ellipse-N
- MicroStrain 3DM-GV7-AHRS vs VectorNav VN-100 Rugged IMU/AHRS
- Movella Xsens MTi-630 AHRS vs VectorNav VN-100 Rugged IMU/AHRS
- VectorNav VN-200 Rugged GNSS/INS vs VectorNav VN-100 Rugged IMU/AHRS
- VectorNav VN-300 Rugged Dual GNSS/INS vs VectorNav VN-100 Rugged IMU/AHRS