SparkFun Electronics Pro Micro - ESP32-C3 vs SparkFun Electronics Thing Plus - SAMD51
Both are controllers. Where they differ, as each maker states it: clock speed: 160 MHz and 120 MHz; flash: 4 MB and 1 MB. Every number links to the maker's own page.
| Spec | SparkFun Electronics Pro Micro - ESP32-C3 | SparkFun Electronics Thing Plus - SAMD51 |
|---|---|---|
| Processor | ESP32-C3FH4 32-bit RISC-V single-core sparkfun.com | Atmel ATSAMD51J20 MCU sparkfun.com |
| Clock speed | 160 MHz sparkfun.com | 120 MHz sparkfun.com |
| Flash | 4 MB sparkfun.com | 1 MB sparkfun.com |
| SRAM | 400 KB sparkfun.com | 256 kB sparkfun.com |
| GPIO pins | 22 sparkfun.com | not stated |
| Operating voltage | 3.0 to 3.6 V sparkfun.com | not stated |
| Connectivity | Wi-Fi 802.11b/g/n, Bluetooth 5 LE sparkfun.com | not stated |
| Dimensions | 1.3 x 0.7 in sparkfun.com | not stated |
| Regulator | not stated | 600 mA 3.3 V regulator and LiPo charger sparkfun.com |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison
Also compared
- Raspberry Pi Pico W vs SparkFun Electronics Pro Micro - ESP32-C3
- SparkFun Electronics Pro Micro - RP2040 vs SparkFun Electronics Pro Micro - ESP32-C3
- SparkFun Electronics Thing Plus - ESP32 WROOM (USB-C) vs SparkFun Electronics Pro Micro - ESP32-C3
- SparkFun Electronics Thing Plus Matter - MGM240P vs SparkFun Electronics Pro Micro - ESP32-C3
- SparkFun Electronics Thing Plus - RP2040 vs SparkFun Electronics Pro Micro - ESP32-C3
- Arduino Nano 33 BLE vs SparkFun Electronics Thing Plus - SAMD51
- SparkFun Electronics RedBoard Turbo - SAMD21 Development Board vs SparkFun Electronics Thing Plus - SAMD51