VectorNav VN-100 SMD vs VectorNav VN-110E
Both are IMUs. Where they differ, as each maker states it: weight: 3.5 g and 12 g. Every number links to the maker's own page.
| Spec | VectorNav VN-100 SMD | VectorNav VN-110E |
|---|---|---|
| IMU data rate | 800 Hz vectornav.com | 800 Hz vectornav.com |
| Interface | Serial TTL, SPI vectornav.com | 24-pin 1mm pitch board-to-board connector, 2x serial TTL vectornav.com |
| Weight | 3.5 g vectornav.com | 12 g vectornav.com |
| Operating temperature | -40 to +85 vectornav.com | -40 to +85 C vectornav.com |
| Heading accuracy | 2 deg RMS vectornav.com | not stated |
| Roll/pitch accuracy | 0.5 deg RMS vectornav.com | not stated |
| Navigation data rate | 400 Hz vectornav.com | not stated |
| Supply voltage | 3.2 to 5.5 vectornav.com | not stated |
| Size | 24 x 22 x 3 mm vectornav.com | not stated |
| Gyroscope range | not stated | 490 deg/s vectornav.com |
| Accelerometer range | not stated | 15 g vectornav.com |
| Gyro bias stability | not stated | < 1 deg/hr vectornav.com |
| Power | not stated | < 1 W vectornav.com |
| Dimensions | not stated | 31 x 31 x 12 mm vectornav.com |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison