Robocho Join free
Robots Parts Modulino Latch Relay

Arduino

Modulino Latch Relay

Other partHomeHobby

Watch: changes show on your home page, plus one email a day at most when a fact, listing or review changes.

A bistable latching relay on a Qwiic-connected board, for switching DC loads under I2C control. Used for DC power control and automation.

Specs

SpecValueSource
Relay typeBistable latchingdocs.arduino.cc
Maximum DC voltage30 Vdocs.arduino.cc
Coil voltage3 Vdocs.arduino.cc
Coil activation current100 mAdocs.arduino.cc
Idle power consumption3.4 mAdocs.arduino.cc
InterfaceI2C (Qwiic), SWDdocs.arduino.cc
Board dimensions41 mm × 25.36 mmdocs.arduino.cc
Show the exact words from each source
  • Relay type: “Relay Type: HFE60/3-1HT-L2 bistable latching” docs.arduino.cc
  • Maximum DC voltage: “Maximum DC voltage: 30V” docs.arduino.cc
  • Coil voltage: “Coil Voltage: 3 V nominal, 2.4 V min, 3.9 V max” docs.arduino.cc
  • Coil activation current: “Coil activation: ~100mA for 50ms (during switching only)” docs.arduino.cc
  • Idle power consumption: “Power Consumption: ~3.4 mA idle, ~100 mA during switching” docs.arduino.cc
  • Interface: “Communication: I2C (Qwiic), SWD (reprogramming)” docs.arduino.cc
  • Board dimensions: “Board dimensions: 41 mm × 25.36 mm” docs.arduino.cc

Price and where to buy

No public price from the maker. Dealers quote this one.

Robocho sells nothing and earns nothing from these links or requests.

Compare with

Other part

Arduino

BugHopper

  • USB-to-UART bridgeFTDI FT230XQ-R
  • Target boardUNO Q (via JCTL 2.54 mm connector)
  • USB connectorUSB-C
Other part

Arduino

Ethernet Shield 2

  • Ethernet controllerW5500
  • Connection speed10/100 Mb
  • Operating voltage5 V

Owner reviews

No reviews yet.

Write a review Free profile.