Robocho Join free
Robots Parts GPS-RTK Dead Reckoning Breakout - ZED-F9R (Qwiic)

SparkFun Electronics

GPS-RTK Dead Reckoning Breakout - ZED-F9R (Qwiic)

Other partResearchHobby

Watch: changes show on your home page, plus one email a day at most when a fact, listing or review changes.

A GNSS receiver breakout built on the u-blox ZED-F9R module, with two Qwiic connectors and a u.FL antenna connector. Used for RTK rover positioning with a separate base station.

Specs

SpecValueSource
GNSS channels184 channelssparkfun.com
Signal bandsL1C/A and L2Csparkfun.com
Horizontal accuracy with RTK0.01 msparkfun.com
Max navigation rate30 Hzsparkfun.com
Time to first fix, cold24 ssparkfun.com
Velocity accuracy0.05 m/ssparkfun.com
Weight11.05 gsparkfun.com
Qwiic connectors2 connectorssparkfun.com
ProtocolsNMEA, UBX, RTCM over UART or I2Csparkfun.com
Show the exact words from each source
  • GNSS channels: “184-Channel GNSS Receiver” sparkfun.com
  • Signal bands: “Receives both L1C/A and L2C bands” sparkfun.com
  • Horizontal accuracy with RTK: “0.01m with RTK” sparkfun.com
  • Max navigation rate: “Max Navigation Rate: Up to 30Hz” sparkfun.com
  • Time to first fix, cold: “Cold: 24s” sparkfun.com
  • Velocity accuracy: “Velocity Accuracy: 0.05m/s” sparkfun.com
  • Weight: “Weight: 11.05g” sparkfun.com
  • Qwiic connectors: “2x Qwiic Connectors” sparkfun.com
  • Protocols: “Supports NMEA, UBX, and RTCM protocols over UART or I2C interfaces” sparkfun.com

Price and where to buy

US$299.95 maker list price, seen 2026-11-11. Source

Robocho sells nothing and earns nothing from these links or requests.

Compare with

Other part

Arduino

BugHopper

  • USB-to-UART bridgeFTDI FT230XQ-R
  • Target boardUNO Q (via JCTL 2.54 mm connector)
  • USB connectorUSB-C
Other part

Arduino

Ethernet Shield 2

  • Ethernet controllerW5500
  • Connection speed10/100 Mb
  • Operating voltage5 V

Owner reviews

No reviews yet.

Write a review Free profile.