Robocho Join free
Robots Parts Qwiic Haptic Driver - DA7280

SparkFun Electronics

Qwiic Haptic Driver - DA7280

Other partHobbyEducation

Watch: changes show on your home page, plus one email a day at most when a fact, listing or review changes.

A small vibration-feedback board that pairs a Linear Resonant Actuator with the DA7280 driver chip and connects over Qwiic. Used to add haptic feedback to projects.

Specs

SpecValueSource
Qwiic connection ports2sparkfun.com
MotorLRA vibration motor, built insparkfun.com
Control interfaceI2C, PWM, or GPIO pinssparkfun.com
Input voltage2.8V to 5.5Vlearn.sparkfun.com
DA7280 I2C address0x4Alearn.sparkfun.com
Board dimensions1.00 in x 1.15 inlearn.sparkfun.com
Show the exact words from each source
  • Qwiic connection ports: “2x Qwiic Connection Ports” sparkfun.com
  • Motor: “1x Built-in LRA Vibration Motor” sparkfun.com
  • Control interface: “via I2C, PWM, or a combination of three general purpose input pins” sparkfun.com
  • Input voltage: “between 2.8V to 5.5V as explained in the datasheet.” learn.sparkfun.com
  • DA7280 I2C address: “The address for the DA7280 is 0x4A.” learn.sparkfun.com
  • Board dimensions: “The board dimension is 1.00" x 1.15".” learn.sparkfun.com

Price and where to buy

No public price from the maker. Dealers quote this one.

Robocho sells nothing and earns nothing from these links or requests.

Compare with

Other part

Arduino

BugHopper

  • USB-to-UART bridgeFTDI FT230XQ-R
  • Target boardUNO Q (via JCTL 2.54 mm connector)
  • USB connectorUSB-C
Other part

Arduino

Ethernet Shield 2

  • Ethernet controllerW5500
  • Connection speed10/100 Mb
  • Operating voltage5 V

Owner reviews

No reviews yet.

Write a review Free profile.