Bosch Sensortec BMI088 vs DFRobot Fermion: MPU-6050 6 DOF Sensor
Both are IMUs. Their stated specs are close. Every number links to the maker's own page.
| Spec | Bosch Sensortec BMI088 | DFRobot Fermion: MPU-6050 6 DOF Sensor |
|---|---|---|
| Accelerometer range | ±3, ±6, ±12, ±24 g bosch-sensortec.com | ±2/4/8/16 g wiki.dfrobot.com |
| Gyroscope range | ±125, ±250, ±500, ±1000, ±2000 °/s bosch-sensortec.com | ±250/500/1000/2000 dps wiki.dfrobot.com |
| Interface | SPI, I2C bosch-sensortec.com | I2C wiki.dfrobot.com |
| Supply voltage | 2.4 to 3.6 V bosch-sensortec.com | 3 to 5 V wiki.dfrobot.com |
| Dimensions | 3 x 4.5 x 0.95 (LGA) bosch-sensortec.com | 14 x 21 mm wiki.dfrobot.com |
| Maximum output rate | 12.5 Hz to 2 kHz bosch-sensortec.com | not stated |
| Operating temperature | -40 to +85 °C bosch-sensortec.com | not stated |
| Sensor chip | not stated | MPU-6050 wiki.dfrobot.com |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison
Also compared
- DFRobot Gravity: BMI160 6-Axis Inertial Motion Sensor vs Bosch Sensortec BMI088
- DFRobot Gravity: BMX160+BMP388 10 DOF Sensor vs Bosch Sensortec BMI088
- MicroStrain 3DM-GV7-AHRS vs Bosch Sensortec BMI088
- Movella Xsens MTi-630 AHRS vs Bosch Sensortec BMI088
- Pololu MinIMU-9 v6 vs Bosch Sensortec BMI088
- SparkFun Electronics Micro 6DoF IMU - ISM330DHCX (Qwiic) vs Bosch Sensortec BMI088
- DFRobot Gravity: BMX160+BMP388 10 DOF Sensor vs DFRobot Fermion: MPU-6050 6 DOF Sensor
- MicroStrain 3DM-GV7-AHRS vs DFRobot Fermion: MPU-6050 6 DOF Sensor
- Movella Xsens MTi-630 AHRS vs DFRobot Fermion: MPU-6050 6 DOF Sensor
- Pololu MinIMU-9 v6 vs DFRobot Fermion: MPU-6050 6 DOF Sensor
- SparkFun Electronics 9DoF IMU Breakout - LSM9DS1 vs DFRobot Fermion: MPU-6050 6 DOF Sensor
- SparkFun Electronics Micro 6DoF IMU - ISM330DHCX (Qwiic) vs DFRobot Fermion: MPU-6050 6 DOF Sensor