DFRobot Fermion: MPU-6050 6 DOF Sensor vs Pololu MinIMU-9 v6
Both are IMUs. Their stated specs are close. Every number links to the maker's own page.
| Spec | DFRobot Fermion: MPU-6050 6 DOF Sensor | Pololu MinIMU-9 v6 |
|---|---|---|
| Accelerometer range | ±2/4/8/16 g wiki.dfrobot.com | ±2, ±4, ±8, ±16 g pololu.com |
| Gyroscope range | ±250/500/1000/2000 dps wiki.dfrobot.com | ±125, ±250, ±500, ±1000, ±2000 °/s pololu.com |
| Supply voltage | 3 to 5 V wiki.dfrobot.com | 2.5 to 5.5 V pololu.com |
| Interface | I2C wiki.dfrobot.com | I2C pololu.com |
| Sensor chip | MPU-6050 wiki.dfrobot.com | not stated |
| Dimensions | 14 x 21 mm wiki.dfrobot.com | not stated |
| Sensors | not stated | LSM6DSO gyro and accelerometer, LIS3MDL magnetometer pololu.com |
| Size | not stated | 20 × 13 × 3 mm pololu.com |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison
Also compared
- Bosch Sensortec BMI088 vs DFRobot Fermion: MPU-6050 6 DOF Sensor
- DFRobot Gravity: BMX160+BMP388 10 DOF Sensor vs DFRobot Fermion: MPU-6050 6 DOF Sensor
- MicroStrain 3DM-GV7-AHRS vs DFRobot Fermion: MPU-6050 6 DOF Sensor
- Movella Xsens MTi-630 AHRS vs DFRobot Fermion: MPU-6050 6 DOF Sensor
- SparkFun Electronics 9DoF IMU Breakout - LSM9DS1 vs DFRobot Fermion: MPU-6050 6 DOF Sensor
- SparkFun Electronics Micro 6DoF IMU - ISM330DHCX (Qwiic) vs DFRobot Fermion: MPU-6050 6 DOF Sensor
- Bosch Sensortec BMI088 vs Pololu MinIMU-9 v6
- MicroStrain 3DM-GV7-AHRS vs Pololu MinIMU-9 v6