Robocho Join free

Compare

DFRobot TT Motor with Encoder (6V 160RPM 120:1) vs Pololu 34:1 Metal Gearmotor 25Dx67L mm HP 12V with 48 CPR Encoder

Both are motor and drives. Where they differ, as each maker states it: input voltage: 6 V and 12 V; weight: 50 g and 101 g. Every number links to the maker's own page.

Spec DFRobot TT Motor with Encoder (6V 160RPM 120:1)Pololu 34:1 Metal Gearmotor 25Dx67L mm HP 12V with 48 CPR Encoder
Input voltage6 V
wiki.dfrobot.com
12 V
pololu.com
Gear ratio120:1
wiki.dfrobot.com
34.014
pololu.com
Encoder resolution8 pulses per round
wiki.dfrobot.com
48 CPR
pololu.com
Weight50 g
wiki.dfrobot.com
101 g
pololu.com
No-load speed160 RPM
wiki.dfrobot.com
not stated
Max stall torque0.8 kgf*cm
wiki.dfrobot.com
not stated
Rated torque0.2 kgf*cm
wiki.dfrobot.com
not stated
Max stall current2.8 A
wiki.dfrobot.com
not stated
No-load speednot stated300 rpm
pololu.com
Maximum output power at 12 Vnot stated8.9 W
pololu.com
Shaft diameternot stated4 mm
pololu.com
Dimensionsnot stated25D x 67L mm
pololu.com

Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.

Add more models to this comparison

Also compared