Robocho Join free

Compare

Pololu 19:1 Metal Gearmotor 37Dx52L mm 12V (Spur Pinion) vs Pololu 34:1 Metal Gearmotor 25Dx67L mm HP 12V with 48 CPR Encoder

Both are motor and drives. Where they differ, as each maker states it: no-load speed: 530 rpm and 300 rpm; shaft diameter: 6 mm and 4 mm. Every number links to the maker's own page.

Spec Pololu 19:1 Metal Gearmotor 37Dx52L mm 12V (Spur Pinion)Pololu 34:1 Metal Gearmotor 25Dx67L mm HP 12V with 48 CPR Encoder
Gear ratio18.75 :1
pololu.com
34.014
pololu.com
Input voltage12 V
pololu.com
12 V
pololu.com
No-load speed530 rpm
pololu.com
300 rpm
pololu.com
Shaft diameter6 mm
pololu.com
4 mm
pololu.com
Encoder resolutionnot stated48 CPR
pololu.com
Maximum output power at 12 Vnot stated8.9 W
pololu.com
Dimensionsnot stated25D x 67L mm
pololu.com
Weightnot stated101 g
pololu.com

Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.

Add more models to this comparison

Also compared