Robocho Join free

Compare

Pololu AMIS-30543 Stepper Motor Driver Carrier vs Pololu Jrk G2 21v3

Both are controllers. Where they differ, as each maker states it: minimum operating voltage: 6 V and 4.5 V; maximum operating voltage: 30 V and 28 V; continuous output current: 1.8 A and 2.6 A. Every number links to the maker's own page.

Spec Pololu AMIS-30543 Stepper Motor Driver CarrierPololu Jrk G2 21v3
Minimum operating voltage6 V
pololu.com
4.5 V
pololu.com
Maximum operating voltage30 V
pololu.com
28 V
pololu.com
Continuous output current1.8 A
pololu.com
2.6 A
pololu.com
InterfaceStep and direction
pololu.com
USB, TTL serial, analog, RC control, I2C control
pololu.com
Maximum output current per coil3 A
pololu.com
not stated
Step modes11
pololu.com
not stated
Max nominal battery voltagenot stated24 V
pololu.com
Peak output currentnot stated5 A
pololu.com
Feedbacknot statedAnalog voltage (0 V to 5 V), frequency, none
pololu.com

Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.

Add more models to this comparison

Also compared