Pololu AMIS-30543 Stepper Motor Driver Carrier vs Pololu Tic T825
Both are controllers. Where they differ, as each maker states it: minimum operating voltage: 6 V and 8.5 V; maximum operating voltage: 30 V and 45 V; continuous output current: 1.8 A and 1.5 A. Every number links to the maker's own page.
| Spec | Pololu AMIS-30543 Stepper Motor Driver Carrier | Pololu Tic T825 |
|---|---|---|
| Minimum operating voltage | 6 V pololu.com | 8.5 V pololu.com |
| Maximum operating voltage | 30 V pololu.com | 45 V pololu.com |
| Continuous output current | 1.8 A pololu.com | 1.5 A pololu.com |
| Interface | Step and direction pololu.com | USB, TTL serial (5 V), I2C, analog voltage, quadrature encoder, RC servo pulses pololu.com |
| Maximum output current per coil | 3 A pololu.com | not stated |
| Step modes | 11 pololu.com | not stated |
| Peak output current | not stated | 2.5 A pololu.com |
| Microsteps | not stated | full, half, 1/4, 1/8, 1/16, 1/32 pololu.com |
Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.
Add more models to this comparison
Also compared
- Pololu Jrk G2 21v3 vs Pololu AMIS-30543 Stepper Motor Driver Carrier
- Pololu Motoron M3T453 Triple I2C Motor Controller with JST SH-Style Connectors and VIN Terminal Block vs Pololu AMIS-30543 Stepper Motor Driver Carrier
- Pololu A4988 Stepper Motor Driver Carrier vs Pololu Tic T825
- Pololu DRV8801 Single Brushed DC Motor Driver Carrier vs Pololu Tic T825
- Pololu MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control vs Pololu Tic T825