Robocho Join free

Compare

Pololu Motoron M1T256 Single I²C Motor Controller (Header Pins Soldered) vs Pololu Motoron M2U256 Dual Serial Motor Controller

Both are controllers. Where they differ, as each maker states it: motor channels: 1 and 2; continuous output current per motor: 2.2 A and 1.8 A. Every number links to the maker's own page.

Spec Pololu Motoron M1T256 Single I²C Motor Controller (Header Pins Soldered)Pololu Motoron M2U256 Dual Serial Motor Controller
Motor channels1
pololu.com
2
pololu.com
InterfaceI²C, up to 400 kHz
pololu.com
TTL serial (UART), up to 250 kbps
pololu.com
Minimum motor supply voltage4.5 V
pololu.com
4.5 V
pololu.com
Continuous output current per motor2.2 A
pololu.com
1.8 A
pololu.com
Minimum logic voltage3 V
pololu.com
3 V
pololu.com
Maximum logic voltage5.5 V
pololu.com
5.5 V
pololu.com
Dimensions0.6 × 0.6 in
pololu.com
0.6 × 0.8 in
pololu.com
Maximum motor supply voltage48 V
pololu.com
not stated
Peak output current6.4 A
pololu.com
not stated
Recommended maximum battery voltagenot stated36 V
pololu.com

Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.

Add more models to this comparison

Also compared