Robocho Join free

Compare

Pololu Motoron M2H18v18 Dual High-Power Motor Controller for Raspberry Pi (No Connectors or Standoffs) vs Pololu Motoron M2U256 Dual Serial Motor Controller

Both are controllers. Where they differ, as each maker states it: minimum motor supply voltage: 6.5 V and 4.5 V; continuous output current per motor: 18 A and 1.8 A. Every number links to the maker's own page.

Spec Pololu Motoron M2H18v18 Dual High-Power Motor Controller for Raspberry Pi (No Connectors or Standoffs)Pololu Motoron M2U256 Dual Serial Motor Controller
Motor channels2
pololu.com
2
pololu.com
InterfaceI²C
pololu.com
TTL serial (UART), up to 250 kbps
pololu.com
Minimum motor supply voltage6.5 V
pololu.com
4.5 V
pololu.com
Continuous output current per motor18 A
pololu.com
1.8 A
pololu.com
Minimum logic voltage3 V
pololu.com
3 V
pololu.com
Maximum logic voltage5.5 V
pololu.com
5.5 V
pololu.com
Maximum motor supply voltage30 V
pololu.com
not stated
Recommended maximum battery voltagenot stated36 V
pololu.com
Dimensionsnot stated0.6 × 0.8 in
pololu.com

Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.

Add more models to this comparison

Also compared