Robocho Join free

Compare

Pololu Motoron M2T256 Dual I2C Motor Controller vs Pololu MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control

Both are controllers. Where they differ, as each maker states it: maximum operating voltage: 48 V and 35 V; continuous output current: 1.8 A and 1.5 A. Every number links to the maker's own page.

Spec Pololu Motoron M2T256 Dual I2C Motor ControllerPololu MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control
Minimum operating voltage4.5 V
pololu.com
4.5 V
pololu.com
Maximum operating voltage48 V
pololu.com
35 V
pololu.com
Continuous output current1.8 A
pololu.com
1.5 A
pololu.com
Size0.6 in x 0.8 in
pololu.com
0.6 in x 0.8 in
pololu.com
Motor channels2
pololu.com
not stated
Control interfaceI2C (up to 400 kHz)
pololu.com
not stated
Logic voltage range3.0 V to 5.5 V
pololu.com
not stated
Peak output currentnot stated2.5 A
pololu.com
Microstep resolutionsnot statedfull, 1/2, 1/4, 1/8
pololu.com

Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.

Add more models to this comparison

Also compared