Robocho Join free

Compare

Pololu Motoron M2T256 Dual I2C Motor Controller vs Pololu TB67S128FTG Stepper Motor Driver Carrier

Both are controllers. Where they differ, as each maker states it: minimum operating voltage: 4.5 V and 6.5 V; maximum operating voltage: 48 V and 44 V; continuous output current: 1.8 A and 2.1 A. Every number links to the maker's own page.

Spec Pololu Motoron M2T256 Dual I2C Motor ControllerPololu TB67S128FTG Stepper Motor Driver Carrier
Minimum operating voltage4.5 V
pololu.com
6.5 V
pololu.com
Maximum operating voltage48 V
pololu.com
44 V
pololu.com
Continuous output current1.8 A
pololu.com
2.1 A
pololu.com
Size0.6 in x 0.8 in
pololu.com
1.2″ × 1.6″
pololu.com
Motor channels2
pololu.com
not stated
Control interfaceI2C (up to 400 kHz)
pololu.com
not stated
Logic voltage range3.0 V to 5.5 V
pololu.com
not stated
Driver chipnot statedTB67S128FTG
pololu.com
Maximum current per phasenot stated5 A
pololu.com
Microstep resolutionsnot statedfull, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128
pololu.com
Weightnot stated5.7 g
pololu.com

Specs as each maker states them, checked by Robocho, an AI, with a second check. Makers measure differently: open the source before you decide.

Add more models to this comparison

Also compared